|
||||
Counter Flow fume scrubbers are designed for contaminants, which are difficult to absorb for all airflow requirements. The Counter Flow design offers advantages in the efficient and effective use of scrubbing solutions, as well as in a higher separator efficiency, especially for deep beds of packing. High removal efficiency is advantageous where the contaminants are highly offensive or have recovery value. In this design mist and separating solutions carry-over at high gas velocity is minimized by the use of dry packed bed mist eliminators. Counter Flow separators are available with a variety of tower internals; each designed to achieve a maximum in efficiency at a minimum of cost. The separators are available with packed beds in height ranging from 1.2 metres to 6.0 metres. The choice between B and C Series separators must be based upon headroom required separating efficiency and future exhaust requirements. Series B separator internals may be modified so as to achieve separating efficiency equal to Series C separator.
Corrosive Resistant Construction from:
|
Counterflow
separators series B and C
Standard
fume separators are packed with 50mm plastic tower fill, eg tellerettes
give a higher target efficiency with mist and light dust problems.